Bulletin 61-231: Alpine I & II Disk Brakes

NUMBER: 61-231 DATE: APRIL 19, 1961 GROUP: MISCELLANEOUS TO: ALL ROOTES GROUP DEALERS SUBJECT: DISC BRAKES SUNBEAM ALPINE SERIES I & II Where complaints are received in respect of “squeal” on the disc brakes fitted to the front wheels of the above model, this can be overcome by fitting special anti-squeal shims. The shims, of (more…)

Bulletin 60-191: Alpine Soft Top Assembly

MISCELLANEOUS PROCEDURES No. 191 June 30, 1960 TO ALL ROOTES GROUP DEALERS SOFT TOP ASSEMBLY – SUNBEAM ALPINE A number of instances have been brought to our attention where Dealers and owners have found the soft top assembly very difficult to erect feeling that the soft top assembly fabric has been cut too short and (more…)

Bulletin 60-185: Alpine Mud and Water Entry Into Front Hub Bearings

NUMBER:60-185Date June 1, 1960 GROUP: STEERING MODEL: SUNBEAM ALPINE TO ALL ROOTES GROUP DEALERS This may be caused by a defective hub oil seal or by a damaged `O’ ring seal (Part No. 9107088) on the conical seat of wire wheel type hubs. HUB OIL SEAL From Chassis No. B9006126 onwards a double lip oil (more…)

Bulletin 60-184: Rapier & Alpine “D”-type Overdrive Oil

NUMBER:60-184 DATE: May 31, 1960 GROUP: TRANSMISSION & OVERDRIVE MODEL: SUNBEAM RAPIER AND ALPINE SUBJECT: “D” TYPE OVERDRIVE OIL LEAKS TO ALL ROOTES GROUP DEALERS For some time we have investigated a few cases of overdrive failure due to oil loss which became associated with sustained high speed driving. It is felt that to overcome (more…)