Wiper motor – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

This topic has 1 reply, 2 voices, and was last updated March 29, 2021 at 7:26 am by Eric and Bonnie and Bonnie Gibeaut.

Viewing 1 reply thread

Author

Posts
- March 28, 2021 at 5:37 pm #84858
  Daniel and Judi McKeel
  Hello. I have a issue with my wiper motor. I took it to a reliable repair shop. He claimed he had it running but couldn’t do it with the switches I provided because he called it a shunted motor. I don’t care if it has both speeds but no matter how I hook it up it will not run. Simply is the red wire for 12volt feed and is there a ground wire or does the housing provide the ground? This is making me feel really stupid. Thanks
- March 29, 2021 at 7:26 am #84859
  Eric and Bonnie and Bonnie Gibeaut
  Participant
  Here is how to bench test the wiper motor
  The ground wire goes to negative 12 volts and the case of the wiper motor
  Green wire goes to positive 12 volts.
  Red/green wire and ground wire together gives high speed.
  Red/green wire and brown/green wire and ground wires together gives low speed.
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.