All posts, newest on top
In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.
After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.
To edit or trash YOUR post, use the links shown below
-
-
Please indicate you VIN number and engine lot ID.
The location is from sitting in the drivers seat. Let us know if it is a LHD or RHD Tiger.
-
I’ll start –
I have the wrong VC’s on my car but here is the info –
Engine lot A27KA – LHD, driver side at the back
-
Engine original to car…B9472283 Engine s/n 3049-S27KA Model. C4PZ-6001-cf option 90-2632
-
Hi,
I assume this is the original engine. My Tiger was originally a LHD now converted to RHD and the decal is located on the what is now the right hand rocker cover to the front.
Engine: 6744-B19KC
Model: C4PZ-6001CF
SO #: S02632
Regards, Robin.
-
VIN- B9470768
LHD
ENGINE – 1851-A27KA
MODEL – C4PZ-6001-CF
S.O. NUMBER – SO-2632
I have LAT finned aluminum valve covers and have mounted the plate on a magnetic sheet. I then placed it on the firewall on the passenger side.
Originally, the plate was on the passenger valve cover towards the rear.
I find the magnetic sheet does not affect the paint and I can easily remove the plate if I need to. I have done this with dash plaques and other tags I wish to display without paint damage.
Fred Baum
- You must be logged in to reply to this topic.
.
