U Nuts for Headlight Bucket to Fender – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

This topic has 2 replies, 2 voices, and was last updated January 29, 2024 at 12:46 pm by Jeffrey Randall.

Viewing 2 reply threads

Author

Posts
- January 28, 2024 at 4:01 pm #99875
  Donald Berkley
  Participant
  I cannot find u-nuts (aka speed nuts) for the fender ring that the headlamp bucket screws to. I’ve been to several hardware stores and none of their stock seems to match what is required.
  
  Any information for this part would be most helpful and greatly appreciated. Thank you for your time and attention.
- January 28, 2024 at 4:16 pm #99876
  Donald Berkley
  Participant
  I am thinking maybe I’ll just use stainless nuts and bolts to attach the headlight buckets to the body. I can reach inside the fender enough to do that. I had planned to do a lot of work on the Tiger today and I spent most of my time driving to different hardware and auto stores, That really takes a toll mentally. I need to relax a bit and stream a few Quinn Martin Productions shows.
- January 29, 2024 at 12:46 pm #99879
  Jeffrey Randall
  Participant
  I’m pretty sure they are riveted to the fender ring.
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.