tiger master cylinder spacer – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

This topic has 3 replies, 2 voices, and was last updated May 2, 2010 at 5:54 pm by sivallan.

Viewing 3 reply threads

Author

Posts
- April 26, 2010 at 11:04 pm #57525
  sivallan
  Hello,
  
  Sorry to be a donut, but I took the 66 Tiger’s clutch and brake master cylinders off for rebuild and did not make a note regarding which uses a spacer between it and the firewall?
  
  My Alpine has the spacer for the brake master–does that hold for the Tiger also?
  
  Thanks in advance,
  
  Allan
- April 27, 2010 at 10:39 am #63475
  sivallan
  Ok – found this in my sole reference book, under Master Cylinder removal:
  
  5. remove the master cylinder and DISTANCE PIECE
- April 27, 2010 at 11:20 am #63476
  Eric and Bonnie and Bonnie Gibeaut
  Participant
  Yes it should have the spacer or the pedal will be waaaayyyyy out of adjustment! See you at the Invasion. Eric
- May 2, 2010 at 5:54 pm #63487
  sivallan
  I noticed that the Tigers at the Sunbeam Invasion X just completed in NC had the spacers for BOTH master cylinders, yikes, will fix that and also will get a better reference book 🙂
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.