replacement frame components – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

This topic has 1 reply, 2 voices, and was last updated November 18, 2007 at 11:36 pm by Jeff Nichols.

Viewing 1 reply thread

Author

Posts
- November 17, 2007 at 7:14 pm #57057
  John Heffron and Sandy Nairn
  I understand that Rob Martel is essentially out of the Tiger sheet metal business. Is there any source for frame components for a rusty Tiger such as the x frame sleeves or center panel?
  
  Thanks
  John
  67MK1a
  B382001303LRXFE
- November 18, 2007 at 11:36 pm #61732
  Jeff Nichols
  Participant
  You can check Vic Brit for a lot of the body and frame patch panels. From what I heard a lot of work in needed on the panesl to make them fit. One other choice is Tiger Engineering. They sell patch panels for the frame and panhard rod.
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.