new ring and pinion – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

Tagged: ring and pinion source

This topic has 1 reply, 2 voices, and was last updated May 5, 2024 at 3:40 pm by Gary and Maureen Corbett.

Viewing 1 reply thread

Author

Posts
- April 18, 2024 at 9:37 pm #100843
  Mike Schreiner
  Participant
  .(changing gears) cant seem to find a source of a (19 SPLINE ring and pinion anywhere…..Spline is different (does that matter….I am installing a posi and need lower gear than 288,,,,,,,installer will only use a new gear set
- May 5, 2024 at 3:40 pm #101188
  Gary and Maureen Corbett
  Participant
  Mike – Hi, you should be able to find a gearset reasonably easy. You might remember the series of articles in Classic Motorsport about restoring their tiger – here is the article on the rear axle: https://classicmotorsports.com/project-cars/1965-sunbeam-tiger/looking-at-a-tigers-rearend/
  
  They mention Volusia Drivetrain in Daytona Beach – you couldtry there.
  
  Gary
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.