Mk II stock valve size – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

This topic has 0 replies, 1 voice, and was last updated January 18, 2018 at 12:48 am by rfraser.

Viewing 0 reply threads

Author

Posts
- January 18, 2018 at 12:48 am #58562
  rfraser
  Has anyone measured the size of the valves in the stock Mk II head; the C6OE-M Head?
  
  All the Ford literature indicates 1.78" intake valve but just about every other source indicates 1.67" intake valve.
  
  The Shop Manual indicates 1.67" – Mustangtek.com indicates 1.67"
  
  A real measurement is needed here to clear up this point.
  
  The C4OE-A 260 head which the majority of original Tiger engines came with has 1.67" intake valves and 1.45" exhaust valves
  
  Ron Fraser
Author

Posts

Viewing 0 reply threads

You must be logged in to reply to this topic.