Look whats in my garage now…….. – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

This topic has 1 reply, 2 voices, and was last updated April 3, 2010 at 2:31 am by Gerald Porsch.

Viewing 1 reply thread

Author

Posts
- April 2, 2010 at 4:02 pm #57517
  Duke Samouce
  347 Cubic Inches of goodness.
  
  1991 5.0 HO block
  Scat 9000 Crank
  Probe I beam rods (5.315)
  Probe SRS pistons flat top
  Clevite bearings
  1/2" girdle with windage tray
  Trick Flow Stage 2 Hydraulic Roller Cam
  (Specs Duration at .050 Int – 224 Exh – 232 with Intake lift at .542 and exhaust at .563 with a 1.6 rocker, 112 overlap)
  
  Bluprinted and balanced 28 oz
  
  I found this baby on Craigs List believe it or not, seller had $4600 in it. I, as the new owner, have less than half of that. 😉
  
  Will be looking at a spring 2011 install.
- April 3, 2010 at 2:31 am #63456
  Gerald Porsch
  Nice piece you can really pick up some good deals now
  Good luck with the new combo
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.