Viewing 2 reply threads
  • Author
    Posts
    • January 22, 2018 at 7:49 pm #58563
      66tiger289
      Participant

      Hi
      Could some please post the measurements and the thickness for the badge posted in the picture.
      \https://drive.google.com/file/d/1JSZ1BZh80d5_9D5dRwyfQeJUJXmV49C5/view?usp=sharing
      Thanks 😀

      Steve

    • January 27, 2018 at 7:40 pm #66995
      rfraser
      Participant

      Steve
      To really get accurate measurements of this part you need an optical comparator.
      The top edge has about a 3 5/8" radius and the bottom edge has about a 4" radius also I found 2 different size badges.

      Center line vertical measurement #1 = 1.507" #2 = 1.552" this is not a value asked for but without making a square fixture to hold and measure this part – it’s the best I can do.
      Top measurement #1 = 1.509" #2 = 1.555"
      Bottom measurement #1 = 1.247 #2 = 1.298"

      If your intent is to reproduce these Insert – Motifs; I suggest you email STOC UK to see if a drawing is available in the Rootes Archive.

      All the inserts should be similar in measurements; here are the part numbers
      Sunbeam 260 – 2234516
      powered by Ford ? – 2231536
      Sunbeam V8 – 2235726

      Ron Fraser

    • January 29, 2018 at 5:54 pm #66996
      66tiger289
      Participant

      Thanks Ron,
      That’s a great help 😀

      Steve

  • Author
    Posts
Viewing 2 reply threads
  • You must be logged in to reply to this topic.