HOODS – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

This topic has 1 reply, 2 voices, and was last updated January 16, 2010 at 4:11 am by alpine-64.

Viewing 1 reply thread

Author

Posts
- January 15, 2010 at 10:09 pm #57492
  anonymous
  Are all Alpine and Tiger round corner hoods interchangable? How about the square corner ones?
  
  Fred Baum
- January 16, 2010 at 4:11 am #63387
  alpine-64
  Participant
  the early alpine round corener hoods are a little different.. different mounting point for the hood stay and perhaps slightly different around the front edge internally where the early cars cleared the header tank.. all square corners should be the same.
  
  the early cars used differenmt hinges.. but the same mounting positions so that should not be an issue.
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.