GENERATOR/ALTERNATOR BRACKET HOLE LOCATION

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

This topic has 2 replies, 2 voices, and was last updated August 27, 2015 at 1:56 pm by anonymous.

Viewing 2 reply threads

Author

Posts
- August 26, 2015 at 2:21 pm #58342
  anonymous
  Are the bolt spacing on a 260 and a 289 block for the generator and alternator bracket the same? In other words, can a 289 alternator bracket bolt up to the generator bracket holes on as 260? Can the alternator bracket be modified to fit the 260?
  
  Fred Baum
- August 26, 2015 at 7:55 pm #66240
  mikephillips
  I don’t have both in front of me, but they should interchange. Standard bolt pattern in the front of the R/H,(facing forward) cylinder head. You don’t need to redo them when swapping heads which says to me that they’re Ford standard spaced holes.
- August 27, 2015 at 1:56 pm #66244
  anonymous
  Thanks, Mike.
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.