Front End Alignment – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

This topic has 2 replies, 3 voices, and was last updated April 24, 2007 at 1:00 pm by Bud & Donna Elliott.

Viewing 2 reply threads

Author

Posts
- April 23, 2007 at 4:23 am #56918
  don-wood
  I have finished a total rebuild on my front suspension.
  There seems to be some controversy on the
  alignment specs. I would like some recomendations
  and comments.
  Thanks,
  Don Wood
- April 24, 2007 at 11:54 am #61239
  George and Beverly and Beverly Coleman
  Participant
  Call Doug Jennings at Tiger Auto he has the specs. that he uses on his race car and I have just finished major front end rebuild on my Tiger and I used his specs. 😀 good luck
- April 24, 2007 at 1:00 pm #61240
  Bud & Donna Elliott
  I’m curious about those specs for the race car. Normally, race car allignment calls for a ton of negative camber. Great for racing, horrible for tire life. The specs I have used in the past call for zero to 1/2 degree negative camber and zero to 1/16th toe in.
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.