front brakes – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

This topic has 2 replies, 3 voices, and was last updated January 14, 2008 at 3:59 pm by George and Beverly and Beverly Coleman.

Viewing 2 reply threads

Author

Posts
- January 14, 2008 at 1:41 am #57100
  Tony & Kyle Malone
  I had a leak in my front right caliber, upon closer inspection it seemed to have been coming from the pistons that had some rust near the end. I replaced the pistons and saw no obvious damage to the inside wells (scratches/gouges) I still have a leak even worse than before. Any suggestions? Thanks
- January 14, 2008 at 5:00 am #61883
  Jeff Nichols
  Participant
  You didn’t say if you replaced the seals. If not, you must do that. I recommend removing both calipers and sending to Apple Hydraulics in New York for a rebuild. They have a web site and you can Google it.
- January 14, 2008 at 3:59 pm #61885
  George and Beverly and Beverly Coleman
  Participant
  Replace the seals, if you have new pistons the seals will do the trick. As for Apple be careful with these guys the work that I had them do was not very good 😯
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.