Do pontiac hubs work on alpine spindles?

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

This topic has 2 replies, 3 voices, and was last updated March 24, 2011 at 3:26 am by krisha.

Viewing 2 reply threads

Author

Posts
- March 11, 2008 at 3:26 am #57139
  gaalpine
  I thought I read somehwere that certain pontiac hubs will fit on the alpine front spindles, has anyone got any info?
  Thanks
- July 22, 2008 at 4:25 pm #62372
  Joel & Karen Griffin
  Participant
  I machined new front hubs for my project,narrowing the front track 3"
  
  Joel
- March 24, 2011 at 3:26 am #63996
  krisha
  Thinking about this the top a-arm would need to be shorten or the lower a-arm needs to be lengthen. Steering stops need to be addressed. The spindle length is a bit shorter so there would be a little bit more spring compression. And is the spindle location the same for ride heigth is this gonna be true also with the pontiac grand prix parts?
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.