A car guy’s nightmare – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

This topic has 3 replies, 2 voices, and was last updated April 10, 2014 at 5:47 pm by Mark and Nancy Petri.

Viewing 3 reply threads

Author

Posts
- February 13, 2014 at 5:17 pm #58114
  Anonymous
  Saw this first thing this morning . . .
  
  http://abcnews.go.com/m/story?id=22477750
- February 13, 2014 at 11:08 pm #65486
  Mark and Nancy Petri
  Participant
  Thanks for posting. I saw this yesterday – ugh 🙁 Well, at least no-one was hurt.
  AutoWeek [on-line] has some security video of the actual collapse and some from a remote-control helicopter that goes down into the hole:
  http://www.autoweek.com/article/2014021 … dailydrive
  
  This is a very nice Museum and tribute to "America’s Sports Car", I have been there a couple of times. Unique/Cool building as well.
  I hope that they can get everything fixed up… but how do you repair a building that is now sitting over a 30-foot deep hole 😯
- March 6, 2014 at 6:33 pm #65527
  Mark and Nancy Petri
  Participant
  I’ve seen various articles, photos, and a couple of videos on line… looks like the Museum is making good progress 🙂 with the "recovery" effort. A couple of the cars look pretty bad, I think that some others are buried under a lot of rubble.
  
  http://www.autoweek.com/article/2014030 … dailydrive
- April 10, 2014 at 5:47 pm #65594
  Mark and Nancy Petri
  Participant
  According to this article on AutoWeek [on-line], the last of the Corvettes was recovered from the sinkhole. This one looks pretty much beyond repair:
  http://www.autoweek.com/article/2014041 … dailydrive
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.