4Lug hubs for front and rear available?

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

This topic has 2 replies, 2 voices, and was last updated March 11, 2008 at 3:24 am by gaalpine.

Viewing 2 reply threads

Author

Posts
- March 10, 2008 at 6:08 am #57138
  gaalpine
  Hi, My 66 Alpine has the knock offs,which I want to replace with 4(or5) lug hubs;does anyone have them or can you direct me to someone or a supplier who does?
  
  If worse comes to worse , is there a supplier that has new knock off hubs?
  Thanks,
  James
- March 10, 2008 at 12:37 pm #62069
  mikephillips
  You can get new splined hubs from Britih wire wheel or Dayton wire wheel. Not cheap though. If you do go that route inspect the condition of the splines in the wheels as well. If they are not in new or nearly new condition you should replace them as well. If you don’t then the uneven pressure of the worn spline against the new ones will cause the new hubs to wear faster than they should.
- March 11, 2008 at 3:24 am #62074
  gaalpine
  Thanks Mike
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.