I have made a few changes out of necessity:
1. Added two items to the Kit.
a. A 1/32″ thick spacer utilized for spacing the caliper with the rotor.
b. A replacement for the Sunbeam Alpine/Tiger E-brake rod. It does not have the 90 degree elbow. It
is designed to be cut to your required length & it is threaded for a 5/16-24 Yoke (Yoke is provided).
2. The Kit sells for $900 including shipping to lower 48 states.
a. Axle Housing brackets to Caliper OEM Bracket Quantity 2 each (1 each side)
b. SPACERS Axle to Housing 1/4″ Quantity 2 each (1 each side)
c. SPACERS Axle to Housing 1/8″ Quantity 2 each (1 each side)
d. SPACERS Axle to Housing 1/16″ Quantity 2 each (1 each side)
e. Spacers Axle to Housing 1/32″ Quantity 2 each (1 each side)
f. E-Brake lever replacements for Saturn stock lever quantity 1 each (RH & LH).
g. Plate replacement for stock vacuum plate quantity 2 each (1 each side).
h. BOLTS 10 mm 1.5 x 25 12.9 for Axle Housing Bracket to Caliper OEM Bracket Quantity 4 each
i. BOLTS ¼ – 20 (Alpine) 5/16-20 (Tiger) w/nuts and washers quantity (depends on # of spacers).
j. Also calipers; drilled rotors; pads; hard lines w/tee and hoses
NOTE: Brackets, Spacers, E-brake rod, Levers and Yoke will come powder coated.
PDF and PIC’s are available
https://docs.google.com/document/d/1ufxDssxyhCOTSqlMQfcO_g7N2BYXFFTfHedjX31frYo/
-
This reply was modified 9 months, 1 week ago by
Dan Richardson. Reason: Added a fixed price and clarified some wording