Narrow mount Dynalite – TigersEast AlpinesEast

All posts, newest on top

In order to add a new topic, or look through the categories, either use the drop down link (top) to Fourm Categories (shown right) or use the link to Forums Table of Contents here.

After you have chosen a Category for your new topic, scroll to the bottom of the page to find the form to add your question or comment.

To edit or trash YOUR post, use the links shown below

February 28, 2005 at 4:32 pm #58837

James & Susan Ellis

I compared a stock caliper to this one [Dynalite that is] and it looks like it will work provided the mount holes in the caliper can be drilled to a larger size and then fit with an off set bushing. Then there is the Outlaw M16 caliper that is a bolt on no bushing needed the Outlaw caliper is around $190 the Wilwood is $135.

Here is the link to the Wilwood caliper that I am looking at.
http://www.wilwood.com/Products/001-Cal … /index.asp

Here is the Outlaw caliper.
http://www.pegasusautoracing.com/Produc … RecId=4400