Viewing 4 reply threads
  • Author
    Posts
    • May 21, 2012 at 5:15 pm #57865
      Steve Leis

        Can anyone tell me which of these mounts are left and which is right?

        Thanks

      • May 21, 2012 at 10:34 pm #64578
        Gene & Anthony Padgett

          The mounts have a short ear and a long ear with the holes that attach to the block. When installed on the hanger, the short end side should be forward.

          Gene

          PS: You might want to consider drilling some countersunk holes on the face side shown and putting some 5/16 reinforcing bolts through the rubber pad. Use Nylock nuts on the other side only snuggly tightened. Pics are in http://www.tigersunited.com website article on building a 350 Lunati motor by Tim Ronak. 🙂

        • May 22, 2012 at 2:02 am #64579
          Steve Leis

            thanks for the feed back Gene. 😀

          • May 23, 2012 at 11:51 pm #64581
            0neoffive
            Participant
              quote artic cat:

              thanks for the feed back Gene. 😀

              Also, on those done by Ford and several other suppliers, you can find a feint L or R stamped in the inner pocket that faces the block. rw

            • June 5, 2012 at 1:36 pm #64593
              Duke Samouce

                You have two right mounts……and you can see that the two right mounts are not the same. You got these from AutoZone?
                Right mount number – 2221
                http://www.autozone.com/autozone/parts/ … 11_0_43023

                The left mount is part number – 2220
                http://www.autozone.com/autozone/parts/ … 12_0_43023

                I would take them back and get mounts from NAPA, much better quality and they will be correct. As tight as the egine is, you can’t have sloppy made mounts.

            • Author
              Posts
            Viewing 4 reply threads
            • You must be logged in to reply to this topic.