United 2010 Tech Sessions

Information pertaining to the United 2010 event. If you weren't there to share the fun, make sure you don't miss the next one.
Stu
Silver
Silver
Posts: 70
Joined: Wed Feb 16, 2005 12:57 pm
Club Member of TEAE?: No
Location: Massachusetts

United 2010 Tech Sessions

Postby Stu » Thu Sep 03, 2009 8:16 pm

I’m coordinating the tech session for the TE/AE United in the Fall of 2010. Since we have plenty of time to plan, lets take a look at the subject of tech sessions in general.

Using your experience at Uniteds, Suni’s or other car events, please consider and respond to the following questions;

What types of tech sessions have you considered worthwhile in the past?

What types of tech sessions were definitely not worthwhile?

What would you like to see?

What would be a waste of time?

If we had a live demonstration of some procedure, how long should it be? What would you like to see demonstrated?

If a live demonstration was quite long, would you consider skipping other events to follow it to completion, a tour, picnic, or whatever?

Would you want to have tech presentations during one of the other events, such as the autocross or the concours?

Do you want published notes for each presentation?

What could YOU present?

Any other thoughts?

I don’t know what we’ll be able to do with any of this info. As the schedule evolves, we’ll find out how much time we would have for any presentations or demonstrations. Tod did say that we may be able to bring a car into one their meeting areas and do some sort of demonstration there. They probably would not want us making too much of a mess, though.

Thanks in advance for your consideration.

Stu Brennan

65sunbeam
Chairman
Chairman
Posts: 922
Joined: Sat Jan 29, 2005 10:57 am
Club Member of TEAE?: Yes
Membership Number: 257
Location: Columbia, SC

Re: United 2010 Tech Sessions

Postby 65sunbeam » Fri Sep 04, 2009 1:28 pm

Hi Stu
How about Tiger Tom showing us the guts of an Alpine OD unit and what wears out, how to repair it, and operating tips. The same info about brake boosters would be interesting. Perhaps a vintage tire supplier could update us on available 13 inch tires and wire wheel tips. Many automotive paint suppliers have reps to give talks on their line of paint and supplies-that would be interesting to hear as well. Just some ideas to toss around! Thanks, Eric
"Life is too short to own just one Sunbeam!"
TE/AE #257

Duke
Silver
Silver
Posts: 138
Joined: Fri Jul 06, 2007 9:05 am
Club Member of TEAE?: No
Location: Fort Leavenworth, KS

Re: United 2010 Tech Sessions

Postby Duke » Sat Sep 05, 2009 8:45 pm

Would love to see the rear wheel bearings R&R on a Tiger.
Duke
B382002037LRXFE

User avatar
jaars
Platinum
Platinum
Posts: 479
Joined: Sat Jan 29, 2005 12:47 pm
Club Member of TEAE?: Yes
Membership Number: 1248
Location: Cornish, NH

Re: United 2010 Tech Sessions

Postby jaars » Thu Sep 24, 2009 9:42 am

I remember a "life" section at the Dayton United many moons ago:
Installation of the soft top. This could be done again.
If somebody has the car and the top, and the owner might get it installed perfectly for free.

2. Installation of the front window with adjustments to the quarter door windows.
3. Headliner installation in a hardtop.
4. Brake caliper rebuild.
5. Electrical circuit updates: adding fuses, relays, generator to alternator swap, etc.
6. A full restoration planning session: Do-'s and don't-'s.

Robert

User avatar
kerch
Silver
Silver
Posts: 21
Joined: Wed Feb 04, 2009 9:30 am
Club Member of TEAE?: Yes
Membership Number: 0
Location: Harrisburg, PA
Contact:

Re: United 2010 Tech Sessions

Postby kerch » Sun Oct 25, 2009 8:32 am

I sure vote yes for TigerTom doing the guts of the Alpine OD unit! (Saw him do a transmission in Georgia. It was, as expected, MASTERFUL!) A supplier of 13" tires AND TUBES would be really useful!
Kerch
Kerch McConlogue
Webmaster, TEAE
Harrisburg, PA
webmaster@teae.org


Return to “TE/AE United XXIX Information”

Who is online

Users browsing this forum: No registered users and 1 guest