Delco Alternator/ Ford Regulator Wiring

Post information regarding the modification of Alpines.
Posts: 1
Joined: Fri May 06, 2016 7:52 pm
Club Member of TEAE?: No

Delco Alternator/ Ford Regulator Wiring

Postby Codeseven » Fri May 06, 2016 8:32 pm

I have a Delco 3 wire alternator and Ford Voltage Regulator. I came across this tech tip which helped greatly but I have some questions...

I bought the regulator from NAPA..... ... 0354897235

Question, the alternator and regulator I have differ from the markings in the tech article. My alternators markings are FLD, BAT, STE and GRD, and on my regulator instead of F 2 3 4 mine has I A S F. On my regulator am I correct in assuming F=F, 2=S, 3=A and 4=I ? If that's true then according to the article wouldn't my connections be, F->FLD, S->also to FLD (not STE?), A->former Lucas Alternator Relay brown wire, I->former Lucas Alternator Warning Light Simulator brown/black wire along with new resistor circuit as per diagram.

Has anyone used this article to install their Delco alternator? Thanks

Return to “Modified Alpine”

Who is online

Users browsing this forum: No registered users and 1 guest